Microphone not working with Banana

The Virtual Audio Mixer discussions and support...
Post Reply
oscardelta77
Posts: 7
Joined: Sun Apr 19, 2020 1:51 pm

Microphone not working with Banana

Post by oscardelta77 »

Hello,

When banana is running, voice recognition won't work; the Microphone gets no sound.(microphone on hyperx headset).
Voice recognition works fine when i shut down banana.

I've set microphone as hardware input1
Headset is set as output 1 and soundblaster play!3 set as output2.

Thanks for your help !
Oliver
Last edited by oscardelta77 on Tue Oct 13, 2020 11:06 pm, edited 1 time in total.
oscardelta77
Posts: 7
Joined: Sun Apr 19, 2020 1:51 pm

Re: Microphone not working if banana is running

Post by oscardelta77 »

Hi,

So :
- Microphone(WDM) is set as hardware input #1
- VoiceMeeter Output is set as default recording device
- B1 is enabled for harware input #1

Should'nt it work this way ?

Regards,
Oliver.
oscardelta77
Posts: 7
Joined: Sun Apr 19, 2020 1:51 pm

Re: Microphone not working if banana is running

Post by oscardelta77 »

It's still not working :?

Any idea ?

Thanks !

Image

Image

Image

Image

Image

Image
Andres
Posts: 65
Joined: Fri May 01, 2020 7:25 pm

Re: Microphone not working with Banana

Post by Andres »

Hi Oliver. ¿Have you tried selecting MME interface (instead of WDM) from Hardware Input 1? Could you please provide a screenshot of Voicemeeter System Settings / Options dialog box? Voicemeeter allows you to set WDM Exclusive Mode for Inputs so you could check that too.
Last edited by Andres on Wed Oct 14, 2020 5:20 pm, edited 2 times in total.
sjc-or
Posts: 25
Joined: Sun Sep 06, 2020 11:17 pm

Re: Microphone not working with Banana

Post by sjc-or »

I think since virtual devices are only either recording device or playback device at a given time, that you cannot monitor on the same VAIO port as you are recording, rather you would have to monitor the microphone on a different physical port or turn on "listen" in the WIndows dialog box.

At least that is what I'm thinking. I too would like to monitor the input of a given VAIO port to see what my voice sounds like at the final destination rather than monitor through a separate physical port. There are a few threads on this subject on the board that I could find.
Vincent Burel
Site Admin
Posts: 1354
Joined: Sun Jan 17, 2010 12:01 pm

Re: Microphone not working with Banana

Post by Vincent Burel »

you may check your microphone level is no ZERO and not MUTED

otherwise you may try to select another audio interface for your Microphone.
if WDM does not work, simply use MME.
Post Reply