VB Cable not on Stereo

VB-Cable A & B, HIFI-Cable, ASIO Bridge
Post Reply
Soujiro89
Posts: 2
Joined: Thu May 10, 2018 4:33 pm

VB Cable not on Stereo

Post by Soujiro89 »

Hello. Just finished formatting my PC after an un-related issue. After installing VB-Cable and Voicemeter Banana, the CABLE audio device is not properly going into Stereo Mode. Video proof.

Since I could not record it directly, I used a mic with my headphones on, so the stereo effect is not there. However the visual shows that a second sound should be made, and it's not there.
Vincent Burel
Site Admin
Posts: 2008
Joined: Sun Jan 17, 2010 12:01 pm

Re: VB Cable not on Stereo

Post by Vincent Burel »

check its default format in the Control Panel / Sound Dialog box
In the properties of the recording (or playback) device , go in advanced tab .
Soujiro89
Posts: 2
Joined: Thu May 10, 2018 4:33 pm

Re: VB Cable not on Stereo

Post by Soujiro89 »

Vincent Burel wrote:check its default format in the Control Panel / Sound Dialog box
In the properties of the recording (or playback) device , go in advanced tab .
Thanks, it was on the recording that it was causing the issue on playback!
Post Reply