ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency

VB-Cable A & B, HIFI-Cable, ASIO Bridge
Post Reply
Ient
Posts: 7
Joined: Fri Aug 02, 2019 11:57 pm

ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency

Post by Ient »

Hi Vincent Burel.





These're my Asiobridge statistics when playing a song using *my DAC( " Schiit Modi Uber" ) ,


I. https://imgur.com/DbAm5Lh


II. https://imgur.com/X81RMtn



,




i. Based on I. , what're the bit perfect settings for my


1. ASIO Control Panel's-

1.i. Bit Depth, it's 16, 24 & 32 bits options only?
1.ii. Latency?




2. In Control Panel-> Hardware and Sound, " Schiit Modi Uber"'s " Speakers Properties"' bit & Hz/ should I only configure " Hi- Fi Cable Input" ?




ii. Based on II. , am I correct optimal Asiobridge Hi- Fi Max Latency= 1,536smp ?







Thx very much.
Last edited by Ient on Mon Aug 12, 2019 12:04 pm, edited 1 time in total.
Ient
Posts: 7
Joined: Fri Aug 02, 2019 11:57 pm

Re: ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency

Post by Ient »

Referring to I. , in the manual https://www.vb-audio.com/Cable/VBCABLE_ ... ttings.pdf under Finding Best Latency: it says


" This basic formula is working also for Hi-Fi Cable. "



but it didn't say whether " max buffer size" includes both input & output, in following section it shows a similar situation to mine where input & output is different, but didn't say if it applies to ASIOBridge, in ASIOBridge statistics mid & right column= input & output respectively? , no label? , is it ok for bit perfect audio to put highest max latency, 32768 smp for convenience, as I think the correct max latency's lesser? , I also want your opinion/ facts on bit perfect audio best config for both bit rates & sample rates including control panel's, eg is using higher's no effect/ must exactly same, you didn't say, all above unclear, please answer first post questions only & all these questions'll mostly answered.







If all in this literally page's explained in another manual please tell me.



If for my questions you don't care & don't wanna answer, please easily only say *z.
Vincent Burel
Site Admin
Posts: 2008
Joined: Sun Jan 17, 2010 12:01 pm

Re: ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency

Post by Vincent Burel »

for ASIO Bridge, i recommend to not go below 256 sample ASIO buffer
(HIFI Cable is based on our previous generation of virtual cable that cannot well support high frequency callback / request).

the MAX Latency is regarding the HIFI-CABLE only and we recommend to keep it as default (7168 samples)... possibly increase it if you are running 192 or more kHz.

HIFI-Cable and ASIO bridge are managing 24 and 32 bit perfect... but the HIFI Cable input and output resolution are pending on applications connected on.
Post Reply