NEW VB-Streamer not connecting to remote computer

[Jubis_1963]

Hello, I'm trying hard to connect the new (beta 3.0.2.0) VB-Streamer to control the volume of a remote computer. Using local config works well but when I change to a remote IP I get "Voicemeeter is not responding to VBAN#1" and got this MSG

vban error.png (8.89 KiB) Viewed 21793 times

.

My configuration is:
Local computer ip:192.168.1.101
remote computer ip:192.168.1.102

Potato VBAN Config LOCAL.png (86.94 KiB) Viewed 21793 times

I also tried to change the port on both computers to something else like 6301 and I got audio streaming, macrobuttons with midi working but not the streamer-view.

AM I doing something wrong? Help Please!

Thanks

[Vincent Burel]

if you run the streamer view to use it with VBAN connection, you may shutdown VBAN on Voicemeeter because on a given computer, 2x applications cannot use the same UDP port.

[Jubis_1963]

I turned VBAN off on voicemeter

VBAN Off.png (31.83 KiB) Viewed 21788 times

on both computers, turned off Macrobuttons on both too
and still can't connect, only locally!

[Jubis_1963]

Fixed! Thanks...
Found out that I can set separate ports for outgoing! So I changed computer with IP 192.168.1.101 to send at 6302 and computer 192.168.1.102 to send at 6301. that did it.

VBAN FIXED.png (88.52 KiB) Viewed 21788 times

But the VM-Streamer besides ON isn't controlling the audio on the remore computer!

Can I set # ports for incoming? I tried to change one but when I do they change for all Streams!

Thanks

[Jubis_1963]

Justto illustrate what I said, connection OK but controll not working. I zeroed the MAIN (computer) and the sound was still full.

VM_Streaming OK but not working.png (17.76 KiB) Viewed 21777 times

[Jubis_1963]

Made it to work just renaming Command1 to somtehing else! It WORKS! super