- "Voicemeeter output" is now called "Voicemeeter Out B1"
- "Voicemeeter AUX output" is now called "Voicemeeter Out B2"
- "Voicemeeter VAIO3 output" is now called "Voicemeeter Out B3"
- NewVoicemeeterVirtualOutput.jpg (230.29 KiB) Viewed 29944 times
Virtual inputs have basically the same name, but the driver is changed, so could be also re-selected as playback device in your different applications using it.
- NewVoicemeeterVirtualInput.jpg (231.34 KiB) Viewed 29944 times
VAIO extension can be activated by an additional license, see Menu -> VAIO Extension License.
then VAIO 1-5 could be connected to Voicemeeter Hardware Input and from Physical Output Bus (just by a simple new button).
here below the default naming for virtual input after Voicemeeter installation:
- VoicemmeterPotatoNewVirtualInputScheme.jpg (278.91 KiB) Viewed 18139 times
it is also possible to change or reset the device name and icon by the VoicemeeterVAIO_ControlPanel:
the "Reset Pin Name and Icon 2" item will rename Voicemeeter virtual input into "Voicemeeter in #1 to #8" while
the "Reset Pin Name and Icon 1" item will rename Voicemeeter virtual input 6,7,8 to historical name (set by default)
- VaiosExtension_VoicemeeterPotatoIn.jpg (281.15 KiB) Viewed 29943 times
"Voicemeeter in 6" = "Voicemeeter Input"
"Voicemeeter in 7" = "Voicemeeter AUX Input"
"Voicemeeter in 8" = "Voicemeeter VAIO3 Input"
- VBVoicemeeterVAIO_ControlPanel.png (86.88 KiB) Viewed 29932 times
the VAIO_ControlPanel also offer options to activate Windows Volume Control on Voicemeeter Playback device.
or actiave the Loopback pin (normally set by default after installation).
Run this application in Administrator mode to change options.
DO NOT CHANGE THE MAX LATENCY (related to a memory allocation), use the VAIO Latency Menu in Voicemeeter instead.