Voicemeeter - Mic Problems/ Crackling sound / Stutter

[Azp3ct-]

No one who can help.....?

[Vincent Burel]

ok, i see a possible audio conflict
you use your ASIO device as output A1 (with 512 sample buffer) = good!
but you also selected MG-XU Line in as harsdware input #1 : this is a conflict, because you ask for WDM access to an audio driver already accessed with ASIO interface.

to use your ASIO device input directly in Voicemeeter :
you may select nothing as hardware input...
and possibly use ASIO patch to route ASIO input in Voicemeeter strip

voicemeeterBananaASIORouting.jpg (156.96 KiB) Viewed 23590 times

[Azp3ct-]

ok, i see a possible audio conflict
you use your ASIO device as output A1 (with 512 sample buffer) = good!
but you also selected MG-XU Line in as harsdware input #1 : this is a conflict, because you ask for WDM access to an audio driver already accessed with ASIO interface.

to use your ASIO device input directly in Voicemeeter :
you may select nothing as hardware input...
and possibly use ASIO patch to route ASIO input in Voicemeeter strip

voicemeeterBananaASIORouting.jpg

Well i have a Mixer Yamaha mg10xu and my Microphone is in the Mixer Same as my Headphones, if i dont select any input device as microphone i cant use it in Voicemeeter right ?

[Vincent Burel]

if you have selected your Yamaha mg10xu ASIO driver as output A1
you normally should not have to select it as WDM device for your microphone...
because the ASIO PATCH can do it for you directly in a better way.

[Azp3ct-]

if you have selected your Yamaha mg10xu ASIO driver as output A1
you normally should not have to select it as WDM device for your microphone...
because the ASIO PATCH can do it for you directly in a better way.

ok so i have those settings set now, and in Windows Sound settings in looks like this

https://imgur.com/a/OgQkeIx <--------- Playback Device
https://imgur.com/a/PZ8DZaS <--------- Recording Device
https://imgur.com/a/gFnUeZ8 <--------- Voicemeeter Settings


This is how i set it up, is this correct ?

thank you for your help !

[Azp3ct-]

if you have selected your Yamaha mg10xu ASIO driver as output A1
you normally should not have to select it as WDM device for your microphone...
because the ASIO PATCH can do it for you directly in a better way.

Since a few Days, again Distorded Sound and Crackling Sounds appears in Voicemeeter Potato. Why is that and how can we fix this ? Is there a Problem with the Programm because i cant Use discord or Shadowplay anymore.

If i Use my Line in Mic as Source without Voicemeeter its sounds Normal, using it with Voicemeeter making crackling sound and Distorded.

Playback Settings
https://gyazo.com/1a7f6ce961a56cc4d4ca08a952a388cc

Input
https://gyazo.com/38d05947e4bb25078dd89bd47d715bad

Voicemeeter Potato
https://gyazo.com/fd6ec8de08694cbbbaeeef2658453f6e

Voicemeeter Settings
https://gyazo.com/27250dc8b9715f5eb0751c38ffd15ba8

i really need help because iam streaming atm and to the Goal of 4k Followers i dont want to lose this software. because it is so nice. Really need help

[Azp3ct-]

if you have selected your Yamaha mg10xu ASIO driver as output A1
you normally should not have to select it as WDM device for your microphone...
because the ASIO PATCH can do it for you directly in a better way.

Additional Source and Video

https://www.youtube.com/watch?v=shNW2c3 ... e=youtu.be

https://gyazo.com/86082f12dc285fff888940f539eefb8e

https://gyazo.com/cc5eebd07660de6d18f6774ff7e11bd6

[Azp3ct-]

if you have selected your Yamaha mg10xu ASIO driver as output A1
you normally should not have to select it as WDM device for your microphone...
because the ASIO PATCH can do it for you directly in a better way.

Help ?

[Vincent Burel]

if you have problem on VB-CABLE connections (PATH), please check the related VB-CABLE internal latency (must be 7168 sample per default).

[Azp3ct-]

if you have problem on VB-CABLE connections (PATH), please check the related VB-CABLE internal latency (must be 7168 sample per default).

All of the Virtualcables which are installed are 7168 Sample rate