Adjust USB mic gain

The Virtual Audio Mixer discussions and support...
covertnerd
Posts: 9
Joined: Fri Nov 29, 2019 3:15 pm

Adjust USB mic gain

Postby covertnerd » Thu Jun 18, 2020 1:02 am

I'm using a Samson Q2U connect via USB to a laptop running Windows 10. Recording using Voicemeeter banana tape recording option. For some reason I can't adjust the gain on the mic. I want to also record to two separate tracks which I can do but I can't seem to adjust mic gain. See attachment, I have the gain turned down, but doesn't seem to affect the mic volume. Any ideas? Thanks
Attachments
Capture3.JPG
Capture3.JPG (78.89 KiB) Viewed 358 times
Capture.JPG
Capture.JPG (78.01 KiB) Viewed 358 times
Capture2.JPG
Capture2.JPG (81.36 KiB) Viewed 358 times

Andres
Posts: 31
Joined: Fri May 01, 2020 7:25 pm

Re: Adjust USB mic gain

Postby Andres » Thu Jun 18, 2020 2:17 am

Hi. Since you are using virtual output B1 in Composite mode and you want to control the microphone volume with the hardware input 1 fader, you have to change PATCH COMPOSITE mode to POST-Fader by clicking the text next to the PATCH COMPOSITE section of Voicemeeter System Settings / Options window. The text says “Select PRE-Fader inputs…”. Doing so should change the mode from PRE-Fader to POST-Fader.

covertnerd
Posts: 9
Joined: Fri Nov 29, 2019 3:15 pm

Re: Adjust USB mic gain

Postby covertnerd » Fri Jun 19, 2020 7:45 pm

Thanks! Do I need to do anything with the "Patch Insert" section of the Voicemeeter System Settings / Options window?

Vincent Burel
Site Admin
Posts: 1234
Joined: Sun Jan 17, 2010 12:01 pm

Re: Adjust USB mic gain

Postby Vincent Burel » Fri Jun 26, 2020 1:59 pm

PATCH INSERT is only for Virtual ASIO insert driver (whe you connect a DAW or VST Host on Voicemeeter Virtual ASIO insert driver).


Return to “Voicemeeter”

Who is online

Users browsing this forum: Andres and 14 guests