Page 1 of 1

Button state command through VBAN

Posted: Thu Feb 20, 2020 6:43 pm
by LeoLuxo

I have a setup with a main device with some macro buttons and a secondary device dedicated to sending macro button commands.
VBAN TEXT commands work well, but the following command doesn't seem to work:

Code: Select all

Button(3).State = 1;
In the screenshot of the primary device's VBAN config below, you can see that the command does get received:


But it doesn't seem to ever get executed by the primary macro buttons (no buttons on either devices change).
Is this intentional or potentially a bug?

This feature would be very useful to sync different 2-position buttons for example, like a mute button that can be activated from both devices..

Thank you in advance :)

Re: Button state command through VBAN

Posted: Sat Feb 22, 2020 9:25 am
by Vincent Burel
Voicemeeter won't execute instruction for MacroButton... VBAN-TEXT request are not forwarded to MacroButton... But VBAN-MIDI requset are forwarded to MacroButton. so you may consider sending VBAN MIDI message instead (and configure the MacroButton to learn the incoming MIDI code).

Re: Button state command through VBAN

Posted: Sat Feb 22, 2020 5:31 pm
by LeoLuxo
Thank you for the clever workaround idea!
My first tests seems to work well, but I will still need more time experimenting with VBAN MIDI to see how far I can take the idea.