Hi Vincent Burel.
These're my Asiobridge statistics when playing a song using *my DAC( " Schiit Modi Uber" ) ,
I. https://imgur.com/DbAm5Lh
II. https://imgur.com/X81RMtn
,
i. Based on I. , what're the bit perfect settings for my
1. ASIO Control Panel's-
1.i. Bit Depth, it's 16, 24 & 32 bits options only?
1.ii. Latency?
2. In Control Panel-> Hardware and Sound, " Schiit Modi Uber"'s " Speakers Properties"' bit & Hz/ should I only configure " Hi- Fi Cable Input" ?
ii. Based on II. , am I correct optimal Asiobridge Hi- Fi Max Latency= 1,536smp ?
Thx very much.
ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency
ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency
Last edited by Ient on Mon Aug 12, 2019 12:04 pm, edited 1 time in total.
Re: ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency
Referring to I. , in the manual https://www.vb-audio.com/Cable/VBCABLE_ ... ttings.pdf under Finding Best Latency: it says
" This basic formula is working also for Hi-Fi Cable. "
but it didn't say whether " max buffer size" includes both input & output, in following section it shows a similar situation to mine where input & output is different, but didn't say if it applies to ASIOBridge, in ASIOBridge statistics mid & right column= input & output respectively? , no label? , is it ok for bit perfect audio to put highest max latency, 32768 smp for convenience, as I think the correct max latency's lesser? , I also want your opinion/ facts on bit perfect audio best config for both bit rates & sample rates including control panel's, eg is using higher's no effect/ must exactly same, you didn't say, all above unclear, please answer first post questions only & all these questions'll mostly answered.
If all in this literally page's explained in another manual please tell me.
If for my questions you don't care & don't wanna answer, please easily only say *z.
" This basic formula is working also for Hi-Fi Cable. "
but it didn't say whether " max buffer size" includes both input & output, in following section it shows a similar situation to mine where input & output is different, but didn't say if it applies to ASIOBridge, in ASIOBridge statistics mid & right column= input & output respectively? , no label? , is it ok for bit perfect audio to put highest max latency, 32768 smp for convenience, as I think the correct max latency's lesser? , I also want your opinion/ facts on bit perfect audio best config for both bit rates & sample rates including control panel's, eg is using higher's no effect/ must exactly same, you didn't say, all above unclear, please answer first post questions only & all these questions'll mostly answered.
If all in this literally page's explained in another manual please tell me.
If for my questions you don't care & don't wanna answer, please easily only say *z.
-
Vincent Burel
- Site Admin
- Posts: 2133
- Joined: Sun Jan 17, 2010 12:01 pm
Re: ASIOBridge Hi- Fi Cable Bit Perfect Bit Rates, Sample Rates & Latency
for ASIO Bridge, i recommend to not go below 256 sample ASIO buffer
(HIFI Cable is based on our previous generation of virtual cable that cannot well support high frequency callback / request).
the MAX Latency is regarding the HIFI-CABLE only and we recommend to keep it as default (7168 samples)... possibly increase it if you are running 192 or more kHz.
HIFI-Cable and ASIO bridge are managing 24 and 32 bit perfect... but the HIFI Cable input and output resolution are pending on applications connected on.
(HIFI Cable is based on our previous generation of virtual cable that cannot well support high frequency callback / request).
the MAX Latency is regarding the HIFI-CABLE only and we recommend to keep it as default (7168 samples)... possibly increase it if you are running 192 or more kHz.
HIFI-Cable and ASIO bridge are managing 24 and 32 bit perfect... but the HIFI Cable input and output resolution are pending on applications connected on.