Soory that I didn't answer, but I needed to figure out some things
This was the post I wanted to publish first, let me call it
UPDATE 1:
First of all, thanks for your reply.
The funny thing is, that I fixed it by myself before I red your response.
Everything worked fine for me, the realtek output was 2.1 again in non shared mode.
I made it with the configuration (in my controlpanel) of voicemeeter.
But I have a new problem.
I don't know why but any strange xBox configuration was enabled inGame (this doesn't matter for the problem, but I want to explain it)
I wanted to turn this strange inGame thing off and needed to login. After that my Windows was connected to my Microsoft Account, so not to my local account anymore.
Well this wasn't the problem, because the settings were the same and everything worked perfekt. I made a final test (also reconfigurations of voicemeeter worked fine for me) and remembered, that I was connected to my Microsoft Account instant of my local one.
So I just reloged and after the restart I had the same problem again, as I described before.
I tested to configurate voicemeeter (and all the other audio stuff in my control panel) again, but this didn't help again.
I relog to my Microsoft Account (maybe that would help) but again, it didn't. Both are using the same settings.
The problem is, that I can't configurate my digital out as you could see here:
http://image.prntscr.com/image/bbab7b8c ... c8d617.png
I have also an ASUS Board in my 2nd Pc and there it's the same, the configuration tab is grey, but my 2nd pc is working fine with the optical out (as I said in my post before)
There is also no option in my realtek interface for the optical out. I also configurate the normal realtek audio out (which I don't use) as 2.1 and 5.1, but this doesn't depend to the digital out, so it doesn't helped
I really have no idea, please can you may help me?
Isn't there any way to say Voicemeeter that it should use 2.1 in non shared mode? Because it works great if I go directly through the digital out. The sound is great, but if I want to use Voicemeeter it doesn't work.
Here are some screenshots:
digital out from the realtek interface 1st page:
http://image.prntscr.com/image/049be867 ... 113bb2.png
digital out from the realtek interface 2nd page:
http://image.prntscr.com/image/95ff7715 ... a63409.png
digital out from the realtek interface 3rd page:
http://image.prntscr.com/image/ce02cf97 ... d28195.png
Best regards
UPDATE 2:
Well I "fixed" it finaly by reconfigurate VoiceMeeter Banana as 7.1 and then again as 2.1.
After I done this, the optical Out is detected right in VoiceMeeter, but after one PC rr I need to do it again.
Again for every restart of my pc, but just the optical out is wrong
I tried to reinstall the realtek audio drivers and the voicemeeter drivers, but this also doesn't helped.
The "fix" is working, but just till the next restart. If I just let the audio go through the optical out directly, it's working without problems, also after a restart. I got this problems just with VoiceMeeter, but it worked before for about 10 months and it's still working on my 2nd pc, but everything is set up the same like on the 2nd pc and as before the reinstall of Win 10 on my first pc
Could you maybe help me?
Please
Thanks and best regards.
